According to Wallace, and the results of the Copley for the shape

Principles of green laser pointer with remote control should be stated in the first place.
This laser power is needed is a method to what is the traditional method in the same material removal rate, in addition to the small amount of micro-crack. Drawn, psychological specimens of alumina

ceramics, and laser CO2 laser source and Nd - YAG laser. This fracture processing technology to the electromagnetic-ployed on the step shape and blind bend forming thick ceramic substrate.

Processing relationship Groove-crack depth parameters, data-moval rate, the laser scanning speed, laser power discussed. Finally, inspection of measuring surface roughness of the surface and cracks

completely. Conventional ceramic processing method uses a kind of "grinding diamond Removing or high-power laser evaporation materials. green laser pointer with remote control is composed of a RF

remote control.
Diamond grinding wheel, time-consuming, traditional laser machiningneeds high power output. Abstract This paper proposes a new kind of laser processing technology principles, combined with a East

linkage, the recommendations of the cracks. This is called the fracture process. In this technique, the laser is used to scribe to focus on two grooves rectangular board - in the two cross-surface

cracks. An application of laser scattered throughout Groove-cracks of length two Groove-cracks link together. Since the material removal is the linkage of the Groove-cracks. Laser cutting

technology the Lumley fracture control [1] can be attributed to the two-dimensional fracture processing technology. The laser energy absorption in a local area produce mechanical pressure, allowing

the material to separate along moving path of the laser beam. Feed small

and the surface quality of the laser. According to Wallace, and the results of the Copley [9] for the shape of the silicon nitride matrix continuous operation and CO2 laser materialsremovalrate

is5.4 mm / s forrough processing with laser power for RMB 56000 ? w Chryssolouris [11] Study Group. green laser pointer with remote control can truly realize a kind of real wireless freedom.
The theory will use two orthogonal laser beam material, and remove the depth of cut on the cross melt cutting calculation.
355nm, 40kHz, the average power greater than 10W; Spectra Physics YHP-series series laser has reached 266nm, 20kHz, with an average power greater than 1.5W, 355nm, 20kHz, with an average power

greater than 3.5W; Lightwave The electronics company launched the Q301-SM laser has reached the technical indicators in 355nm, 10kHz, the average power greater than 10W.