green laser pointer is very popular in the current market

green laser pointer is very popular in the current market.
The customer needs a complete industrial-grade PC, there are at least four COM ports, digital and analog I / O channels. IPC will control the operation of the entire laser marking equipment. In this system, Advantech IPC-610 built-in 6 I / O and communications card (PCI-1754, PCI-1739U, PCI-1780U, PCI-1710, PCI-1610CU and PCI motion card) to handle complex computing tasks, and control all devices. PCI-1710 to control the calibration of the laser pulse. Controlled by the PCI-1752U shutter and BMES, to ensure that the correct laser beam can enter the galvanometer.  green laser pointer can be used as the traditional teacher’s pointer.
Through the galvanometer, the laser beam will be concentrated to the disk surface will need to mark it designs by the computer is sent to a galvanometer, to determine the XY coordinates of the location of the correct disk surface to guide the laser beam through the PCI-1739U. Controlled by the PCI-1780U disk, the desired alphanumeric character processing to disk. Conclusion: This program has the characteristics of integration, has been field-proven laser process can choose single or double marks, while reducing costs, shortening development time. Offline and online computer-controlled using the same CPU board and I / O card, to facilitate application software development and integration. The USB port is also a part of green laser pointer .
Allows customers to check the digital I / O status LED indicators on the terminal (ADAM-3951), which can save wiring and simple test. PCI - 1739U provides high-density digital input / output figures. 1 PCI-1739U is sufficient to control all the XY coordinates of the galvanometer scanner in the post. Doing so can reduce costs, reduce space and PCI slot in your computer. In order to ensure reliable operation of the laser cutting machine, extend equipment life, improve the processing quality of the product should be strictly abide by the rules. Open the power supply switch, the output voltage switching regulator mode, not the use of electricity. Connected to the machine power switch (□ ON). 2.4G technology of green laser pointer is also used.
Connected to the machine control power (key switch). When the system self-test completed, the axes of the machine back to the reference point. Start the chiller, check the temperature, pressure (normal water pressure 5bar). Chillers 3 minutes after power-on, the compressor starts, the fan rotation to start the refrigeration cooling. Note: chiller heat sink to clean up regularly, to avoid excessive dust affecting work, distilled water for four months in the tank to replace one, can not use tap water or purified water. Open the nitrogen bottles, oxygen bottles, check the cylinder pressure to start the air compressor, cold and dry. The RF products of green laser pointer usually have the higher costs.